Pantograph Line (transparent Etching)
The pantograph line is used to engrave glass and crystal using the wax and acid method to produce shiny engraving. It consists of four machines: a wax, engraving, acid and washing machine .
It is used in manufacturing the line , Raw materials do not react with the acids used , Each machine contains its own safety Procedures for the safety of the worker and the factory , Using The latest software for design and implementation .
Product Samples
1 - Wax Machine
This machine melts the wax used in the tank (made of stainless steel) up to a temperature of 90 degrees in order to allow user to Submerge the required glass for the required period and then leave it outside the machine so that it solidifies forming a thin layer of wax on the required glass) .
Technical Specifications
20-15 pieces / cycle
40 cm
Electric20 seconds
to 5 minutes
380 / 220 Volt
6.5 kw
Automatic
Electric
2 - Engraving Needle Machine:
This machine engraves the wax layer according to the required design on the pieces of glass and crystal of various circular, square and irregular shapes by means of the latest programs for design and implementation
through this machine with three axis to ensure an excellent level of engraving .
Technical Specifications
10 / 8 / 6 Heads
1 piece/ minute (Average)
28 / 23 / 14 cm
37 cm
220 Volt
900 Watt
Electric
3 - Acid Machine :
This machine Submerge the different pieces of glass into the acid tank in order to etch the glass through the chemical reaction between the glass and the acid in order to give a bright etching with high accuracy, then it washes the pieces with water to allow the worker to contact directly without any danger.
Technical Specifications
20 - 15 pieces / cycle
45 cm
Up to 10 minutes
(Allows repetition)
380 / 220 Volt
750 kw
Automatic
Automatic Electric
4 - Washing Machine :
This machine washes the glass pieces with hot water up to 95 degree until the entire wax layer is removed from the required pieces through two / three stages According to customer request.
( the washing cycle is a closed cycle to save water use).
Technical Specifications
20-15 pieces / cycle
3 / 2 stages
45 cm
10 seconds
(Allows repetition)
380 / 220 Volt
7.5 kw
Electric
Automatic
Contact Us
(طبقاً لطلب العميل)
){kind=link}